For high-rise construction interior glazing is sometimes used due to access and logistics of replacing glass from a swing stage. For low rise construction with easy access to the building, outside glazing is typically specified. Interior glazed systems are typically specified for applications with limited interior obstructions to allow adequate access to the interior of the curtain wall. Details are not provided for interior glazed systems because air infiltration is a concern with interior glazed systems. Interior glazed systems allow for glass or opaque panel installation into the curtain wall openings from the interior of the building. Interior and exterior glazed systems offer different advantages and disadvantages. See Moisture Protection below.īoth the unitized and stick-built systems are designed to be either interior or exterior glazed systems. Typical units are five to six feet wide.Ĭurtain walls can also be classified as water managed or pressure-equalized systems. Modules are generally constructed one story tall and one module wide but may incorporate multiple modules. Vertical and horizontal mullions of the modules mate together with the adjoining modules. In the unitized system, the curtain wall is composed of large units that are assembled and glazed in the factory, shipped to the site and erected on the building. In the stick system, the curtain wall frame (mullions) and glass or opaque panels are installed and connected together piece by piece. The following are brief descriptions of commonly used curtain wall framing methods and components.Ĭurtain walls can be classified by their method of fabrication and installation into the following general categories: stick systems and unitized (also known as modular) systems. It is recommended that consultants be hired with an expertise in custom curtain wall design for projects that incorporate these systems. This section incorporates comments about standard and custom systems. Custom walls become cost competitive with standard systems as the wall area increases. Aluminum framed wall systems date back to the 1930's, and developed rapidly after World War II when the supply of aluminum became available for non-military use.Ĭurtain wall systems range from manufacturer's standard catalog systems to specialized custom walls. The wind and gravity loads of the curtain wall are transferred to the building structure, typically at the floor line. The framing is attached to the building structure and does not carry the floor or roof loads of the building. A curtain wall is defined as thin, usually aluminum-framed wall, containing in-fills of glass, metal panels, or thin stone.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |